US Made AK Receivers, Triggers and Hardware
$5.00 flat rate shipping per order. All parts made in US.
TAPCO AK G2 TriggersWorks with all Mil-Spec receiver variations. Offers improved trigger pull of 3-4 lbs. eliminating painful trigger slap common on other designs. Heat treated to a 45-48C Rockwell hardness and manufactured with tough 4140 tool-grade carbon steel. Trigger sleeve allows you to assemble the trigger group outside the rifle and drop it in as one piece. Available in single or double hook....$28.99 |
TAPCO AK/MAK Disconnector SpringNew production...$2.49 |
TAPCO AK Slant Muzzle BrakeEnhanced ambidextrous design perfect for left or right handed shooters. Reducing muzzle climb, this brake allows the collector to maintain the classic look of the AK-47 while adding a low-cost compliant part. Standard AK thread pitch of 14 x 1 LH...$9.99 |
AK Cage Muzzle BrakeFits all AK threaded barrels with a standard AK thread pitch of 14 x 1 LH...$14.99 |
AK Slotted Muzzle BrakeFits all AK threaded barrels with a standard AK thread pitch of 14 x 1 LH...$14.99 |
TAPCO AK-74 Style Muzzle BrakeEasily attaches to the standard AK barrel equipped with 14 x 1 LH threads. Classic design reduces recoil and muzzle rise during firing. Works with 7.62, .223, and 5.45 versions....$19.99 |
AK M16 Style BrakeFits all AK threaded barrels with a standard AK thread pitch of 14 x 1 LH...$14.99 |
AK/AMD 65 Extended Muzzle Brake4.25" long. Fits all AK threaded barrels with a standard AK thread pitch of 14 x 1 LH...$29.00 |
AK-47 Bullet Button (Version 2)This AK-47 Bullet Button ® is designed to fit most AK’s and Saiga’s (depending on the pistol grip conversion). It attaches by two cross screws on the trigger guard. It holds the lock body in place with two set screws. This AK-47 Bullet Button ® is made of billet aluminum and anodized. Black.....$30.00 |
TAPCO AK Grip Screw & T-NutA replacement for the original AK grip screw....$7.25 |
TAPCO AK Receiver Flat and Rails without Trunion HolesConstructed from high strength 4130 carbon steel to an exact 1.05mm thickness. Flats accept single and double hook triggers. Pre-drilled to the correct sizes to ensure a precise build. The flat arrives from the factory in a softened state and once formed it must be heat treated and hardened. Flats are compatible with both the AK47 and AK74....$19.99 |
TAPCO AK Receiver Flat and RailsConstructed from high strength 4130 carbon steel to an exact 1.05mm thickness. Flats accept single and double hook triggers. Pre-drilled to the correct sizes to ensure a precise build. The flat arrives from the factory in a softened state and once formed it must be heat treated and hardened. Flats are compatible with both the AK47 and AK74.....$19.99 |
AK L-Shaped Wire Retaining SpringMade of military grade and specification wire. Retains hammer & trigger pin in AK "semi-auto" models and with its unique design it is simple to install and remove. The top loop is retained by the rifles selector....$3.59 |
AK Retaining PlateThe TAPCO Retaining Plate installs in seconds, quickly securing pins in position to keep your trigger group in place. It works in virtually all AK's including the Tantal version and is finished in a military phosphate coating. It features an installation tab for ease of use inserting and removing the plate. These plates can be modified to work with the Ohio Ordinance Works variation AK receivers....$5.99 OUT OF STOCK |
TAPCO AK Rivet Build Set with Center SupportRivet set. Includes: 2 rear trunion rivets, 5 trigger guard rivets, 1 center support rivet and bushing, and 4 swell neck front trunion rivets....$10.00 |
AK Rivet SetSwell neck AK47 rivet set. Fits fixed stock stamped receivers....$10.00 |
Yugo AK Receiver RivetsComplete rivet set designed for the Yugoslavian M70AB2 fixed and folding variations....$7.99 |
TAPCO Rivet SetRivet set. Includes: 2 rear trunion rivets, 5 trigger guard rivets, 1 center support rivet and 4 swell neck front trunion rivets....$7.99 |
AK AMD-65 PistonManufactured to exacting tolerances for optimal performance, this stainless steel gas piston is a necessary upgrade to your weapon. This is an AMD-65 version with a length of 5.125”....$12.00 |
AK/Saiga Gas PistonThis stainless steel piston is designed to work with the AK-47, AK-74, Tantal, and even Saiga rifles. Each piston comes with a removable bushing that allows you to change the length of the piston to fit your specific rifle.....$14.99 |
|
AK/SKS Military Grade Windage & Elevation Sight ToolManufactured from 4140 steel, this tool is as rugged as the weapon it was designed to work on. Easily make adjustments to AK and SKS variants. The elevation part will not work with SKS YUGO variants.....$14.99 |
TAPCO AK 10 Round Magazine - Black or Dark Earth
|
TAPCO AK-74 10 Round Magazine
|
7.62 x 39 AK Magazine FollowerReplace your current follower in your 5rd magazine with the TAPCO follower and double your capacity. This shorter follower allows for the mag to hold an additional 5 rounds....$2.49 |
7.62 x 39 AK High Capacity Magazine FollowerPerfect for adding a compliant part to your old surplus magazines or to revive an old magazine. This high capacity follower is constructed of the highest quality composite to ensure optimum performance. ....$2.99 |
|